| Type: | Engine System |
|---|---|
| Material: | Rubber |
| Deck: | Single |
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Heavy truck oil seal front crankshaft for FAW.
We make and supply high quality spare parts model 1005050-53D oil seal front crankshaft, Suitable for multiple models,Examples: heavy trucks, light trucks, tractors.
We have more than many years experience in heavy trucks, strict control system and management system to make sure our high quality product, our products sell well all over the world. deeply loved by customers.
Installation Instructions:
1.Ensure Safety: Park the vehicle on a flat surface and engage the parking brake. Wear safety gear, including gloves and safety glasses.
2.Prepare the Work Area: Clean the front of the engine and the surrounding components to prevent contaminants from entering during installation.
3.Locate the Front Crankshaft Seal: Identify the location of the front crankshaft oil seal. It is typically found at the front of the engine, surrounding the crankshaft.
4.Remove Old Seal (if applicable): If replacing an existing seal, carefully remove the old front crankshaft oil seal. This may involve using a seal puller or similar tool.
5.Inspect the Crankshaft Surface: Ensure that the surface of the crankshaft is clean, smooth, and free from any debris or old seal remnants. Use a clean cloth to wipe it down.
6.Apply Lubrication (if recommended): Check the manufacturer's instructions for the specific oil seal. Some seals may require the application of a light coat of engine oil or a specified lubricant on the sealing lip.
7.Position the New Seal: Carefully place the new front crankshaft oil seal over the end of the crankshaft, ensuring proper alignment with the housing.
8.Use a Seal Installer (if available): If available, use a seal installer tool to evenly and gently press the oil seal into place. If not, use a soft mallet or a block of wood to tap it in evenly.
9.Ensure Proper Depth: Check that the oil seal is installed to the recommended depth. Refer to the vehicle's service manual or the seal manufacturer's specifications for guidance.
10.Inspect for Evenness: Ensure that the seal is seated evenly around the circumference and that it is not skewed or crooked.
11.Reassemble Components: If any components were removed during the process, such as pulleys or covers, reassemble them according to the vehicle's service manual.
12.Double-Check Tightness: Confirm that all components are securely tightened. Pay attention to any bolts or fasteners that were removed and reinstalled during the process.
13.Start the Engine: Start the engine and listen for any unusual noises. Monitor for leaks around the front crankshaft seal area.
14.Final Inspection: Once the engine has run for a few minutes, recheck the tightness of components and inspect for any signs of leaks.
15.Dispose of Old Parts: Properly dispose of the old front crankshaft oil seal and any other replaced components.
Hangzhou Jiuxin Auto Trade Co., Ltd. was established on June 1, 2017. It is a subsidiary of Hangzhou FAW Spare Parts Co., Ltd. and specializes in the trading of spare parts for Chinese commercial vehicles. Its parent company, Hangzhou FAW Spare Parts Co., Ltd., has over 30 years of experience in auto parts. The company is located in Hangzhou, Zhejiang, approximately two hours' drive from both Shanghai and Ningbo ports. Currently, the warehouse covers an area of over 10,000 square meters, with over 60,000 SKUs covered. The company has a staff of over 100 people.
1. We supply parts to many truck exporting companies as our competitive edge. We have a large number of direct suppliers for you to choose from, whether they are original products or similar replacement products.
Q1. What is your package of goods ?
A: Generally, we will pack the goods by Neutral boxes ,Pallets or Wooden boxes. If any special needed ,please inform us earlier .
Q2. What the quality of your goods ?
A: We have different qualities, including Original, OEM, High copy, Copy, Refurbished and Second-hand. We can quote according to your real requirements and according to our experiences about your market requirements.
Q3. How do you make a price offer and how long is the validity period?
A: Generally we quote prices according to goods' part number , if you don't have , please provide us chassis number , we can confirm the exactly goods according to the chassis number. About the inquiry list, we usually finish the quotation within 24 hours . If you are very urgent ,please inform us earlier. The prices are valid within 20 days.
Q4. What is your terms of delivery?
A: EXW, FOB, CIF,CPT
Q5. What is your delivery time?
A: 20GP normally 7 to 14 days , 40HC normally 13- 18 days after receiving prepayment. The exactly delivery time depends on the items and quantities which you ordered.
Q6: whats your advantages ?
1.We have morethan 31 years truck parts experiences. We can provide professional suggestions to customers.
2.Strict and complicated inspection process .
3.Perfect After-sales service.
4.Reply on time.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}