Part: | Clutch Button |
---|---|
Material: | Steel |
Classification: | Hydraulic Clutch |
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Name | Clutch Release Bearing | Packaging specifications | |
Product Model | 1602130-A9U/C | tooth count | |
Diameter | 108mm | Applicable model type | JH6 |
Place of production | China | Weight |
Installation Guide:
1.Preparation: Park the vehicle on a level surface and engage the parking brake. Gather the necessary tools and safety equipment.
2.Disconnect Battery: Disconnect the negative terminal of the battery to prevent electrical connections during the installation.
3.Access Clutch Housing: Remove the transmission housing cover to access the clutch assembly. Refer to the vehicle's manual for specific instructions.
4.Release Pressure Plate: Loosen the pressure plate bolts evenly to release tension on the clutch release bearing.
5.Remove Old Bearing: Carefully remove the old release bearing from the release fork, noting its orientation.
6.Inspect Components: Inspect the clutch fork, pivot ball, and other related components for wear. Replace any worn components as necessary.
7.Install New Bearing: Apply a small amount of high-temperature grease to the contact surfaces of the new release bearing. Install it onto the release fork with the correct orientation.
8.Reassemble Components: Carefully reassemble the clutch components, including the pressure plate, making sure the bearing is properly seated.
9.Tighten Pressure Plate: Gradually tighten the pressure plate bolts in a crisscross pattern to ensure even pressure distribution.
10.Reattach Housing Cover: Reattach the transmission housing cover, securing it properly.
11.Reconnect Battery: Reconnect the negative terminal of the battery.
12.Test Engagement: Start the engine and test the clutch engagement and disengagement. Ensure smooth operation.
Important Notes:
1.Expert Installation: Clutch release bearing installation requires technical expertise. If you're not experienced, seek professional assistance.
2.Proper Grease: Use high-temperature grease suitable for clutch components to ensure proper lubrication.
3.Orientation: Pay attention to the orientation of the release bearing during installation to prevent misalignment.
4.Component Inspection: Inspect other related components for wear, and replace any damaged or worn parts.
5.Pressure Plate Bolts: Follow the manufacturer's recommended torque specifications for the pressure plate bolts.
6.Clutch Adjustment: After installation, check and adjust the clutch pedal free play if needed.
7.Road Testing: After installation, road-test the vehicle in a safe area to ensure proper clutch operation.
8.Manual Reference: Consult the vehicle's manual for specific instructions and guidelines during installation.
By following these installation steps and important notes, you can ensure a proper and safe installation of the clutch release bearing.
Hangzhou Jiuxin Auto Trade Co., Ltd. was established on June 1, 2017. It is a subsidiary of Hangzhou FAW Spare Parts Co., Ltd. and specializes in the trading of spare parts for Chinese commercial vehicles. Its parent company, Hangzhou FAW Spare Parts Co., Ltd., has over 30 years of experience in auto parts. The company is located in Hangzhou, Zhejiang, approximately two hours' drive from both Shanghai and Ningbo ports. Currently, the warehouse covers an area of over 10,000 square meters, with over 60,000 SKUs covered. The company has a staff of over 100 people.
Q1. What is your package of goods?
A: Generally, we will pack the goods by Neutral boxes ,Pallets or Wooden boxes. If any special needed ,please inform us earlier .
Q2. What the quality of your goods?
A: We have different qualities, including Original, OEM, High copy, Copy, Refurbished and Second-hand. We can quote according to your real requirements and according to our experiences about your market requirements.
Q3. How do you make a price offer and how long is the validity period?
A: Generally we quote prices according to goods' part number , if you don't have , please provide us chassis number , we can confirm the exactly goods according to the chassis number. About the inquiry list, we usually finish the quotation within 24 hours . If you are very urgent ,please inform us earlier. The prices are valid within 20 days.
Q4. What is your terms of delivery?
A: EXW, FOB, CIF,CPT
Q5. What is your delivery time?
A: 20GP normally 7 to 14 days , 40HC normally 13-18 days after receiving prepayment. The exactly delivery time depends on the items and quantities which you ordered.
Q6: whats your advantages?
1.We have more than 31 years truck parts experiences. We can provide professional suggestions to customers.
2.Strict and complicated inspection process .
3.Perfect After-sales service.
4.Reply on time.
Suppliers with verified business licenses