Type: | Engine System |
---|---|
Material: | Rubber |
Deck: | Single |
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Heavy truck oil pan gasket for FAW.
We make and supply high quality spare parts model DY-1009012-X2 oil pan gasket, Suitable for multiple models,Examples: heavy trucks, light trucks, tractors.
We have more than many years experience in heavy trucks, strict control system and management system to make sure our high quality product, our products sell well all over the world. deeply loved by customers.
Installation Instructions:
1.Preparation:
Park the vehicle on a level surface and safely lift it using a jack and jack stands.
Drain the engine oil from the oil pan, and remove the oil filter for better access.
2.Access to Oil Pan:
Locate the oil pan on the bottom of the engine.
Remove any components obstructing access to the oil pan, such as skid plates or brackets.
3.Clean the Surface:
Thoroughly clean the mating surfaces of both the engine block and the oil pan. Use a gasket scraper or a suitable tool to remove old gasket material and debris.
Ensure that both surfaces are dry and free from oil residue.
4.Inspect and Prepare the Gasket:
Carefully inspect the new oil pan gasket for any defects or damage.
If the gasket requires it, apply a thin layer of gasket sealant to both sides. Follow the manufacturer's recommendations for the type of sealant to use.
5.Gasket Alignment:
Place the oil pan gasket onto the cleaned and dry surface of the engine block, aligning it with the bolt holes.
Ensure that the gasket is properly positioned with any alignment marks or tabs matching those on the engine block.
6.Install the Oil Pan:
Carefully position the oil pan over the gasket, aligning it with the bolt holes in the gasket.
Slowly lower the oil pan onto the gasket, making sure not to displace the gasket during installation.
7.Hand-Tighten Bolts:
Start threading the oil pan bolts by hand to ensure they are properly aligned with the bolt holes.
Gradually tighten each bolt in a crisscross pattern to ensure even pressure on the gasket.
8.Torque the Bolts:
Using a torque wrench, tighten the oil pan bolts to the manufacturer's specified torque values. Refer to the vehicle's service manual for the correct torque settings.
9.Reassemble Components:
Reinstall any components that were removed to access the oil pan, such as skid plates or brackets.
Install a new oil filter and refill the engine with the appropriate amount and type of oil.
10.Check for Leaks:
Start the engine and check for any oil leaks around the oil pan gasket.
Shut off the engine and re-torque the bolts if necessary.
11.Dispose of Old Oil:
Properly dispose of the old engine oil and oil filter at a designated recycling center.
Hangzhou Jiuxin Auto Trade Co., Ltd. was established on June 1, 2017. It is a subsidiary of Hangzhou FAW Spare Parts Co., Ltd. and specializes in the trading of spare parts for Chinese commercial vehicles. Its parent company, Hangzhou FAW Spare Parts Co., Ltd., has over 30 years of experience in auto parts. The company is located in Hangzhou, Zhejiang, approximately two hours' drive from both Shanghai and Ningbo ports. Currently, the warehouse covers an area of over 10,000 square meters, with over 60,000 SKUs covered. The company has a staff of over 100 people.
1. We supply parts to many truck exporting companies as our competitive edge. We have a large number of direct suppliers for you to choose from, whether they are original products or similar replacement products.
Q1. What is your package of goods ?
A: Generally, we will pack the goods by Neutral boxes ,Pallets or Wooden boxes. If any special needed ,please inform us earlier .
Q2. What the quality of your goods ?
A: We have different qualities, including Original, OEM, High copy, Copy, Refurbished and Second-hand. We can quote according to your real requirements and according to our experiences about your market requirements.
Q3. How do you make a price offer and how long is the validity period?
A: Generally we quote prices according to goods' part number , if you don't have , please provide us chassis number , we can confirm the exactly goods according to the chassis number. About the inquiry list, we usually finish the quotation within 24 hours . If you are very urgent ,please inform us earlier. The prices are valid within 20 days.
Q4. What is your terms of delivery?
A: EXW, FOB, CIF,CPT
Q5. What is your delivery time?
A: 20GP normally 7 to 14 days , 40HC normally 13- 18 days after receiving prepayment. The exactly delivery time depends on the items and quantities which you ordered.
Q6: whats your advantages ?
1.We have morethan 31 years truck parts experiences. We can provide professional suggestions to customers.
2.Strict and complicated inspection process .
3.Perfect After-sales service.
4.Reply on time.
Suppliers with verified business licenses