| Car Make: | Other |
|---|---|
| Car Model: | Other |
| Engine Type: | Other |
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Heavy truck cylinder block for FAW.
We make and supply high quality spare parts model WX-1003020-M60-0000Y cylinder block, Suitable for multiple models,Examples: heavy trucks, light trucks, tractors.
We have more than many years experience in heavy trucks, strict control system and management system to make sure our high quality product, our products sell well all over the world. deeply loved by customers.
Installation Instructions:
1.Preparation
Ensure that the engine bay is clean and free from debris.
Verify that the new cylinder block is compatible with the engine model and specifications.
2.Inspect Components
Check the new cylinder block for any defects or damage before installation.
Ensure that all necessary components, such as pistons, crankshaft, and bearings, are in good condition.
3.Clean Engine Bay
Thoroughly clean the engine bay to remove any dirt or contaminants that could interfere with the installation.
4.Lubricate Components
Apply lubricant to critical components such as bearings and cylinder walls to ensure smooth movement during assembly.
5.Install Pistons and Connecting Rods
Carefully install the pistons and connecting rods into their respective cylinders, ensuring proper orientation.
Use a piston ring compressor to ease the installation of the pistons.
6.Place the Crankshaft
Lower the crankshaft into the cylinder block, ensuring that it aligns with the main bearings.
Verify that the crankshaft turns freely and smoothly.
7.Check Alignment
Verify that all components, including pistons, connecting rods, and the crankshaft, are properly aligned within the cylinder block.
8.Apply Sealant
Apply the appropriate sealant to gasket surfaces to ensure a proper seal between the cylinder block and other engine components.
9.Position Cylinder Head Gasket
Place the cylinder head gasket onto the cylinder block, aligning it with the corresponding openings.
10.Install Cylinder Head
Carefully lower the cylinder head onto the cylinder block, ensuring proper alignment with the head gasket.
11.Torque Bolts/Nuts
Follow the manufacturer's specifications to torque the bolts or nuts securing the cylinder head to the cylinder block in the correct sequence.
12.Install Other Components
Install additional components such as the camshaft, timing belt or chain, and other accessories according to the engine's specifications.
13.Attach Accessories
Attach external accessories, such as the water pump, oil pump, and any other components that were removed during disassembly.
14.Fluids and Lubrication
Fill the engine with the appropriate fluids, including oil and coolant. Ensure proper lubrication before starting the engine.
15.Final Inspection
Conduct a thorough visual inspection of the installed cylinder block, checking for any leaks, loose connections, or irregularities.
16.Engine Start-Up
Start the engine and monitor for any unusual sounds or issues. Allow the engine to reach operating temperature while checking for leaks.
17.Post-Installation Checks
Conduct a test drive to ensure that the engine operates smoothly and efficiently.
Recheck all fasteners and connections after the initial operation.
Hangzhou Jiuxin Auto Trade Co., Ltd. was established on June 1, 2017. It is a subsidiary of Hangzhou FAW Spare Parts Co., Ltd. and specializes in the trading of spare parts for Chinese commercial vehicles. Its parent company, Hangzhou FAW Spare Parts Co., Ltd., has over 30 years of experience in auto parts. The company is located in Hangzhou, Zhejiang, approximately two hours' drive from both Shanghai and Ningbo ports. Currently, the warehouse covers an area of over 10,000 square meters, with over 60,000 SKUs covered. The company has a staff of over 100 people.
1. We supply parts to many truck exporting companies as our competitive edge. We have a large number of direct suppliers for you to choose from, whether they are original products or similar replacement products.
Q1. What is your package of goods ?
A: Generally, we will pack the goods by Neutral boxes ,Pallets or Wooden boxes. If any special needed ,please inform us earlier .
Q2. What the quality of your goods ?
A: We have different qualities, including Original, OEM, High copy, Copy, Refurbished and Second-hand. We can quote according to your real requirements and according to our experiences about your market requirements.
Q3. How do you make a price offer and how long is the validity period?
A: Generally we quote prices according to goods' part number , if you don't have , please provide us chassis number , we can confirm the exactly goods according to the chassis number. About the inquiry list, we usually finish the quotation within 24 hours . If you are very urgent ,please inform us earlier. The prices are valid within 20 days.
Q4. What is your terms of delivery?
A: EXW, FOB, CIF,CPT
Q5. What is your delivery time?
A: 20GP normally 7 to 14 days , 40HC normally 13- 18 days after receiving prepayment. The exactly delivery time depends on the items and quantities which you ordered.
Q6: whats your advantages ?
1.We have morethan 31 years truck parts experiences. We can provide professional suggestions to customers.
2.Strict and complicated inspection process .
3.Perfect After-sales service.
4.Reply on time.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}